Cressi Gara Modular LD Nery Dive Fins
version of the Gara Modular made with the collaboration of the freediving champion Guillaume Néry.New
version of the Gara Modular made with the collaboration of the freediving champion Guillaume Néry. The ?ns are made with the high-modulus propylene blade (2500 Mpa). It has lifelong
warranty and highly elastic return. It incorporates two little antiskid spoilers on the ?nal area. The decreasing thickness section (from 4mm to 2mm) causes the highly progressive tonnage eliminating the skid tendency,
because the ?rst half of the set is more rigid and the ? nal
half is more flexible. The foot pocket’s volume has been revised after deep anatomic studies, in such a way as the volume is proportional to the widening effect that the foot pocket causes depending on the foot size. It doesn’t follow a ?xed proportion size by size because proportionally a small foot “fattens” much more than a big foot when putting on the foot pocket. The foot pocket combines two materials, a thermoplastic rubber with high hardness (shore 90), flexible but inelastic and really resistant according to the nerves, to the whole foot pocket’s sole and to the exclusive strap over the instep aimed to make the effort transmission to be immediate without dissipate
in rubbery compositions. The middle of the instep incorporates a band of 2 cm of amplitude “Self-adjusting”, that allows a slight expansion (between 2 and 4 mm according to size) to adapt to people with high
instep or if you want to use thick neoprene socks. The expansion has been meticulously adjusted not to be detrimental the energy transmission. The hardness level of the blade is LD: soft for divers of reduced size and/or that do long movements and medium depth diving.