The new Cayman ET Roller features many innovations that make it a unique speargun in the world of Roller-Type spearguns. The barrel of this gun is made of aluminum with a cuttlefish profile and it is equipped with two enclosed track rails placed above and below the barrel. The top rail is used as a standard “Enclosed Track” and guides shafts equipped with shark fins (you can use shafts from 6.5mm to 7 mm diameter) to avoid any possibility of so the called “shaft whip”.
In the lower part, the guide features 3 fixed fins, where the can place the bottom wishbone for the roller bands. This important innovation is truly innovative since it allows the user to modify the power of the Roller at any time depending on his needs, making it a very versatile speargun. You can also load it easily without the help of specific tools or charging systems.
The muzzle features 2 pulleys with glass spheres protected by an “anti sand” cage. Glass spheres allow for an enhanced performance over time and greatly improve resistance to axial loads developed by elastic tension. The hole in the head can fit one or two circular bands (in this second case with maximum diameter of 16 mm). The muzzle is also equipped with two front stabilizers to reduce the slightest recoil developed from the roller. On the sides of the pulleys there are two stainless guides which hold the shooting line and to prevent contact with the rubber bands.
The handle features the Cayman mechanism made entirely in stainless steel to ensure great sensitivity, even in the face of extreme loads. The handle features a stainless steel eyelet with a long line clip (included) and extra ergonomic soft handle. On the side of the handle, there is a stainless steel ring where a bungee line can be inserted allowing the user to have a direct link to the float on the surface, also known as a break away.
Each cayman ET Roller is equipped with a shaft featuring 3 Laser welded fins specifically designed for the use of Dyneema wishbones. The shaft also features an innovative stabilizer with two functios: Stabilize the shaft during its trajectory and also function as a line clamp.